Glensound INFERNO heliliides

Glensound Inferno on ühele inimesele loodud Dante heliliides, mis ühildub enamlevinud helikonsoolide ja ruuteritega. Inferno ühendab endas Neutrik 3 pin XLR sisendi, mic/line/48v comperssori ja palju muud.

Single Commentator's Box For Dante Audio Networks

Inferno can be used on its own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into the audio network.

Inferno can also be used outside of a dedicated Dante network when connected to one of our DARK or AoIP44 break out boxes. This connection can be direct or across a structured network. The DARK or AoIP44 units allow all of the audio inputs and outputs to be located in a place separate from the Inferno.

Features

• Single user Dante commentary box
  
• System is scalable with multiple commentators as part of a Dante network
  
• Can connect to any Dante compatible network or directly to our DARK units.
  
• Single mic/line/48v input with Referee compressor/limiter
  
• Headphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)
  
• Each headphone input has left/both/right headphone switching 
  
• 7 talkback circuits are programmable via the Dante network
  
• Browser based remote control of input gain and switching functions
  
• PoE, Mains or DC powering options 

Spetsifikatsioonid:

• Input Type: Neutrik 3 pin XLR
  
• Input Impedance: Mic: 2k4; Line 100k
  
• Equivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms)
  
• Frequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+/- 0.25dBu). Line flat till 22kHz
  
• Distortion at +8dBu:  100Hz = 0.023%, 1kHz =0.012%, 10kHz = 0.014%
  
• Line Up Gains: Dynamic Mic: 58dB, Mic + Phantom Power: 35dB, Line: 0dB
  
• Gain Range: Mic: -30 to +15dB, Line: +/-15dB 
  
• Max Input Before Clipping (@line up): Dynamic Mic: +10dBU, Mic+phantom: +18dBu, Line: +18dBu
  

Headphones

• Headphone Impedance: 16-1000 ohm (auto output level to match impedance)
  
• Headphone Noise:  -76.6dB @ line up (residual noise)
  
• Headphone Frequency Response:  >-0.1dB 22Hz to 22kHz
  
• Headphone THD + Noise (Ref +8dB): 0.008% @ 1kHz
  
• Connection: 6.35mm & 3.5mm stereo jack plugs
  
• Headphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)
  
• Maximum Headphone Output: +16.8dB into 600 Ohms

Dante/Aes67 Network Interface

• Physical: 2 x Neutrik Ethercons Cat6 RJ45s & 2 x SFP slots
  
• Type: Fully redundant Primary & secondary circuits
  
• Sample Frequency: 48K
  
• Resolution: 24 Bit
  
• Control & Routing: Via Free Dante Controller
  
• AES67: Can be configured for AES67

Power

• Mains: 1 x Filtered IEC, 100 to 240VAC (+/-10%) 47-63Hz
  
• PoE: Can be powered by PoE on either Copper network interface
  
• DC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts
  
• Consumption: Front Panel Power On LED: Bright Blue
  
• Rear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources

Physical

• Size: 137 x 210 x 86mm (WxDxH)
  
• Weight: 1.25Kg
  
• Mechanics: All aluminium construction, anodised and laser etched, powder coated sides
  
• Shipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)

Environmental

• Operating Temperature: 0 to +50°C (32 to 122°F)
  
• Storage Temperature: -20 to +70°C (-4 to 158°C)
  
• Relative Humidity: 0 to 95% non-condensing

Pakend sisaldab:

• Manuaal 1 tk
  
• Toitekaabel 1 tk
  
• RJ45 kaabel 1 tk