Audac CAP412 võimendi

Audac CAP412 nelja kanaliga 4 x 120W taustheli võimendi

Audac CAP412 on professionaalne CAP seeria taustheli võimendi, mis on loodud kasutamiseks mitmetsoonilistes aplikatsioonides kontorites, jaamades ning mitmetes teistes avalikes ruumides. Võimendi on hea lahendus kasutamiseks nii 100 V, 70 V ning 4 Ohm aplikatsioonides. CAP412 taustheli võimendi sisaldab nelja eraldi seisvat 100V väljundit, "High-pass filter" lülitit, "Gain" funktsiooni igal kanalil ning palju muud. Lisaks on võimendi 19" (2HE) racki mõõdus ning sisaldab ventilaatorjahutust, kaitsmaks seadme osi ülekuumenemise eest. Kaasas  4x 4-Pin Terminal block Output klemmliist. RMS võimsus: 4 x 120W. Helisagedus: 50 Hz - 22 kHz.

Quad Channel 100V Power Amplifier 4 X 120W

The CAP412 is a professional four channel 100V power amplifier which is capable of providing 120 Watt to each of the four separate output channels. This creates a great flexibility and new possibilities for installed Multi-Zone audio distribution systems. It is designed as a no-nonsense amplifier with only the necessary controls and connections, which creates great simplicity in use and installation. Every output channel contains different power taps to be used in 100 Volt, 70 Volt and even 4 Ohm low impedance applications, and the input signal connections are performed using balanced XLR connectors, allowing link through to other amplifiers.

Besides all the desired connection possibilities, the CAP412 also offers a gain control potentiometer and a high-pass filter switch (400Hz) on the back of the unit. A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload, and limits the signal when necessary. This all is built into a double rack space, steel 19” housing.

Features

• 4 x 100 Volt outputs
• 120 Watt output power
• 100V, 70V and 4 Ohm outputs
• Class-D Amplifier Technology
• XLR Signal Linkthrough
• Advanced Protection circuit
• Temperature controlled fan
• High pass filter switch & signal limiter
• 19” Mounting device (2 HE)

Spetsifikatsioonid:

• RMS võimsus: 4 x 120 W
• Helisagedus: 50 Hz - 22 kHz
• Singaali ja müra suhe: > 100 dB
• THD+N by 1 kHz (1/2 Rated Power) :< 0.3%
• Crosstalk: < 80 dB
• Technology: Class-D
• Power supply: Switching mode
• Power supply range: 100 ~ 240 V AC / 50 ~ 60 Hz
• Input Sensitivity: -0.5 dB ~ 10.5 dB
• Input Impedance: 10 k Ohm balanced

Output Voltage / Impedance:

• 100 V (83 Ohm)
• 70 V (42 Ohm)
• 4 Ohm

• Common mode rejection ratio: 70 dB

Protection

• DC Short-circuit
• Over heating
• Over load
• Signal limiting

• Cooling system: Temperature controlled FAN
• Operating temperature: 0° ~ 40° at 95% Humidity

Connectors

Input

• Female XLR with Male Linkthrough

Output

• 4-Pin Terminal block (5.08 mm pitch)

• Mounting: 19”
• Unit height: 2 HE
• Konstruktsioon: Teras
• Värvus: Must
• Mõõtmed: 482 x 88 x 420 mm
• Kaal: 14.8 kg

Pakend sisaldab:

• Audac CAP412 nelja kanaliga 4 x 120W taustheli võimendi 1 tk
• 4 x 4-Pin Terminal block Output klemmliist 1 tk